Home › Codes › Idle, computer & transmission
P0753: Shift Solenoid A Electrical
Severity: Medium Avoid towing, steep loads, and prolonged driving until diagnosed. Stop and arrange recovery if the transmission slips, loses drive, overheats, or bangs into gear; driving through slip can cause further damage.
What does P0753 mean?
The controller detects an electrical fault in shift solenoid A or its wiring. The fault may interrupt fluid-control commands even if the transmission internals are otherwise capable of shifting.
Generic OBD-II definition: Shift Solenoid A Electrical. Confirm applicability in your vehicle service information.
Common causes
- Open or shorted solenoid A winding
- Damaged internal/external harness
- Corroded case connector or lost feed
Symptoms
- Harsh, missing, or incorrect shifts
- Limp mode
- Possible slipping or transmission overheating
Diagnostic focus
Electrical measurements must match the exact transmission and solenoid type. Do not use one universal resistance figure or apply battery voltage without a prescribed test.
Can I keep driving with P0753?
Severity: Medium Avoid towing, steep loads, and prolonged driving until diagnosed. Stop and arrange recovery if the transmission slips, loses drive, overheats, or bangs into gear; driving through slip can cause further damage.
If the check engine light is flashing or the car runs badly, stop driving and have it checked.
Typical fixes
- Inspect the case plug and supply circuit
- Test solenoid A resistance to the correct specification
- Repair verified opens or shorts before assessing shift quality
Related codes
Sources & review
Definitions and diagnostic background checked 2026-11-06. Generic guidance, not a substitute for the service procedure for your exact year, engine, and transmission.